Effluent Treatment Plant

Product Details:

Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater that can be treated in sewage treatment plants. Most industrial processes, such as petroleum refineries, chemical and petrochemical plants have their own specialized facilities to treat their wastewaters so that the pollutant concentrations in the treated wastewater comply with the regulations regarding disposal of wastewaters into sewers or into rivers, lakes or oceans.  This applies to industries that generate wastewater with high concentrations of organic matter (e.g. oil and grease), toxic pollutants (e.g. heavy metals, volatile organic compounds) or nutrients such as ammonia.  Some industries install a pre-treatment system to remove some pollutants (e.g., toxic compounds), and then discharge the partially treated wastewater to the municipal sewer system.
Most industries produce some wastewater. Recent trends have been to minimize such production or to recycle treated wastewater within the production process. Some industries have been successful at redesigning their manufacturing processes to reduce or eliminate pollutants. Sources of industrial wastewater include battery manufacturing, chemical manufacturing, electric power plants, food industry, iron and steel industry, metal working, mines and quarries, nuclear industry, oil and gas extraction, petroleum refining and petrochemicals, pharmaceutical manufacturing, pulp and paper industry, smelters, textile mills, industrial oil contamination, water treatment and wood preserving. Treatment processes include brine treatment, solids removal (e.g. chemical precipitation, filtration), oils and grease removal, removal of biodegradable organics, removal of other organics, removal of acids and alkalis, and removal of toxic materials.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 4 Week

Product Details:

For the treatment of Wet wastes from manufacturing Industry like mining, quarrying and heavy Industries. We are offering a complete range for Effluent Treatment Plant. Their different effluent varies with the type of effluent.  These are accessed by our clients at nominal prices in the industry. Our range is widely appreciated for their quality and efficiency.Zero Liquid Discharge System, Zero Liquid Discharge Plant, zld system, zero liquid discharge plant, zld plant, zero liquid discharge water treatment system

Zero Liquid Discharge (ZLD) is a treatment process designed to remove all the liquid waste from a system. The focus of ZLD is to reduce wastewater economically and produce clean water that is suitable for reuse (e.g. irrigation), thereby saving money and being beneficial to the environment. ZLD systems employ advanced wastewater/desalination treatment technologies to purify and recycle virtually all of the wastewater produced.

Also ZLD technologies help plants meet discharge and water reuse requirements, enabling businesses to:

• Meet stringent government discharge regulations

• Reach higher water recovery (%)

• Treat and recover valuable materials from the wastewater streams, such as potassium sulfate, caustic soda, sodium sulfate, lithium and gypsum

The conventional way to reach ZLD is with thermal technologies such as evaporators (multi stage flash (MSF), multi effect distillation (MED) and mechanical vapor compression (MCV)) and crystallizers and recover their condensate. Thus, ZLD plants produce solid waste.

Product Details:

Sigma Envirotech Leading manufacturer & supplyer  of Effluent treatment plant for Food Industries division in all over india. Sigma Envirotech have also installed Effluent treatment plant in more Food Industries . These Units corrosion resistant and requires minimum maintenance our products are manufactured using  superior quality materials under stringent  supervision.

Effluent can be treated in a number of different ways depending on the level of treatment required. These levels are known as preliminary, primary, secondary and tertiary (or advanced). The mechanism for treatment is divided into three categories: Physical, chemical and biological.

Preliminary Treatment.

·         Preliminary treatment removes in-organic materials and insoluble organic pollutants (i.e., large organic suspended solid matter, grit, O& G) that can be easily collected from the effluent and can damage or clog the pumps or skimmers of primary treatment clarifiers.

·          All preliminary treatments consist of physical separation techniques by controlling flow rate of effluents. Units in Preliminary Treatment, Screens, Scrapers, Aeration

Primary Treatment It consists of temporarily holding the sewage in an inert basin where heavy solids can settle to the bottom where oil, grease and lighter solids float to the surface. The settled material go for sludge treatment in sludge digesters and floating materials are skimmed off and the remaining liquid is passes to secondary treatment. At this stage, over 70% of the suspended solids and 40% of the BOD is removed from the effluent,

·         Secondary Treatment biological treatment of effluent removes dissolved and suspended organic (bio-degradable) matters by consuming food and convert it into new cell mass, energy and CO_2.,Most common micro-organisms are bacteria (aerobic or anaerobic), protozoa and rotifers, least common fungi and algae. This treatment removes almost 70- 90% of BOD and 80- 90% of dissolved solids from effluent. The under flow from the clarifier and the secondary clarifier having a sludge consistency of around 1-1.5% is pumped into the centrifuge for dewatering.

Additional Information:

• Item Code: SES2ETP
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 2000 ltr
• Delivery Time: 2Week

Product Details:

Backed by immense experience and a competent team of experts, we are able to offer Effluent Treatment Plants (ETP). The offered range is appreciated for eliminating unwanted & harmful chemicals from waste water. In addition to this, the offered range is acclaimed in the market for its efficient functioning and durability.

Features:

Sturdy construction

Resistant to corrosion

Superior performance

Rapid installation

Less civil work involved

Flexible in reworking

Additional Information:

• Item Code: SESETP2
• Production Capacity: 20KLD
• Delivery Time: 2Week

Product Details:

Effluent Treatment plant Capecity 5kld Use Industrial Effluent Treatment Special for car washing /Export House/Automobile Sector etc.

Additional Information:

• Item Code: SESETP
• Production Capacity: 35KLD
• Delivery Time: 2Week

Product Details:

Water is most important part in every one life whether it blonging to personal life or industrial life .effluent treatment plant or ETP is one type of waste water treatment method which is particulary designed to purify industrial waste for itsreuse and its aim is to release safe water to envirnment from the harmful effect caused by the effluent. industrial effluent contain various materials,depending on the industry, some effluent contain oils and grease some contain toxic materials. effluents from food &beverage factories contain degradable organic pollutants.since industrial waste water contains a divrsity of immpurities and therefore specific treatmenttechnology called ETP .

Additional Information:

• Item Code: 001
• Pay Mode Terms: T/T (Bank Transfer),D/P
• Delivery Time: 3 to 4 week

Product Details:

ETP Plant Capecity  25KLD Attached with recyle arragement through uf system 
use industrial effluent treatment plant plant pre febricated moc ms

Additional Information:

• Production Capacity: 25KLD
• Delivery Time: 2Week

Product Details:

Sigma Envirotech Leading manufacturer & supplyer  of Effluent treatment plant for Dyeing  Industries division in all over india. Sigma Envirotech have also installed Effluent treatment plant in more Dyeing  Industries . These Units corrosion resistant and requires minimum maintenance our products are manufactured using  superior quality materials under stringent  supervision.

Effluent can be treated in a number of different ways depending on the level of treatment required. These levels are known as preliminary, primary, secondary and tertiary (or advanced). The mechanism for treatment is divided into three categories: Physical, chemical and biological.

Preliminary Treatment.

·         Preliminary treatment removes in-organic materials and insoluble organic pollutants (i.e., large organic suspended solid matter, grit, O& G) that can be easily collected from the effluent and can damage or clog the pumps or skimmers of primary treatment clarifiers.

·          All preliminary treatments consist of physical separation techniques by controlling flow rate of effluents. Units in Preliminary Treatment, Screens, Scrapers, Aeration

Primary Treatment It consists of temporarily holding the sewage in an inert basin where heavy solids can settle to the bottom where oil, grease and lighter solids float to the surface. The settled material go for sludge treatment in sludge digesters and floating materials are skimmed off and the remaining liquid is passes to secondary treatment. At this stage, over 70% of the suspended solids and 40% of the BOD is removed from the effluent,

·         Secondary Treatment biological treatment of effluent removes dissolved and suspended organic (bio-degradable) matters by consuming food and convert it into new cell mass, energy and CO_2.,Most common micro-organisms are bacteria (aerobic or anaerobic), protozoa and rotifers, least common fungi and algae. This treatment removes almost 70- 90% of BOD and 80- 90% of dissolved solids from effluent. The under flow from the clarifier and the secondary clarifier having a sludge consistency of around 1-1.5% is pumped into the centrifuge for dewatering.

 

 

 

 

Additional Information:

• Item Code: SESETP05
• Production Capacity: 2000Ltr.
• Delivery Time: 2Week

Product Details:

Sigma Envirotech Leading manufacturer & supplyer of Effluent treatment plant for automobile division in all over india. Sigma Envirotech have also installed Effluent treatment plant in more automobile workshop. like Toyota, Tata, Hitech etc. These Units corrosion resistant and requires minimum maintenance. our products are manufactured using superior quality materials under stringent supervision.Effluent can be treated in a number of different ways depending on the level of treatment required. These levels are known as preliminary, primary, secondary and tertiary (or advanced). The mechanism for treatment is divided into three categories: Physical, chemical and biological.

Preliminary Treatment.
Preliminary treatment removes in-organic materials and insoluble organic pollutants (i.e., large organic suspended solid matter, grit, O& G) that can be easily collected from the effluent and can damage or clog the pumps or skimmers of primary treatment clarifiers.

· All preliminary treatments consist of physical separation techniques by controlling flow rate of effluents. Units in Preliminary Treatment, Screens, Scrapers, Aeration

Primary Treatment It consists of temporarily holding the sewage in an inert basin where heavy solids can settle to the bottom where oil, grease and lighter solids float to the surface. The settled material go for sludge treatment in sludge digesters and floating materials are skimmed off and the remaining liquid is passes to secondary treatment. At this stage, over 70% of the suspended solids and 40% of the BOD is removed from the effluent,

· Secondary Treatment biological treatment of effluent removes dissolved and suspended organic (bio-degradable) matters by consuming food and convert it into new cell mass, energy and CO_2.,Most common micro-organisms are bacteria (aerobic or anaerobic), protozoa and rotifers, least common fungi and algae. This treatment removes almost 70- 90% of BOD and 80- 90% of dissolved solids from effluent. The under flow from the clarifier and the secondary clarifier having a sludge consistency of around 1-1.5% is pumped into the centrifuge for dewatering.

 

 

 

 

 

Additional Information:

• Item Code: SES1
• Production Capacity: 2kld(2000ltr)
• Delivery Time: 2 Week
• Packaging Details: All items packing with wooden box (Packing charge Extra )as per your recommendation.

Product Details:

We are vastly affianced in offering a comprehensive array of ETP and STP Chemical. Our firm uses modern technologies and machines with excellent quality materials to develop these products. We keep in mind the global standards and specifications to fabricate these products to meet the specific requirements of the much valued customers. We assure that only high quality fault free consignment of these products is delivered to our prestigious customers.

Features :

• Superb composition
• Highly recommended
• Long shelf life

Additional Information:

• Item Code: SES25
• Production Capacity: 25KG Bag
• Delivery Time: ready stock

Product Details:

Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater that can be treated in sewage treatment plants. Most industrial processes, such as petroleum refineries, chemical and petrochemical plants have their own specialized facilities to treat their wastewaters so that the pollutant concentrations in the treated wastewater comply with the regulations regarding disposal of wastewaters into sewers or into rivers, lakes or oceans.  This applies to industries that generate wastewater with high concentrations of organic matter (e.g. oil and grease), toxic pollutants (e.g. heavy metals, volatile organic compounds) or nutrients such as ammonia.  Some industries install a pre-treatment system to remove some pollutants (e.g., toxic compounds), and then discharge the partially treated wastewater to the municipal sewer system.
Most industries produce some wastewater. Recent trends have been to minimize such production or to recycle treated wastewater within the production process. Some industries have been successful at redesigning their manufacturing processes to reduce or eliminate pollutants.Sources of industrial wastewater include battery manufacturing, chemical manufacturing, electric power plants, food industry, iron and steel industry, metal working, mines and quarries, nuclear industry, oil and gas extraction, petroleum refining and petrochemicals, pharmaceutical manufacturing, pulp and paper industry, smelters, textile mills, industrial oil contamination, water treatment and wood preserving. Treatment processes include brine treatment, solids removal (e.g. chemical precipitation, filtration), oils and grease removal, removal of biodegradable organics, removal of other organics, removal of acids and alkalis, and removal of toxic materials.

Additional Information:

• Item Code: 004
• Delivery Time: 4 week